How to Replace a UPVC Door Replacement Lock
If the lock on your door is jammed or isn't functioning as it should, you might want to replace it. It may seem like a complicated process but it's actually quite straightforward and doesn't require the services of a locksmith.
A few basic tools, a bit of patience, and a lot of care will be enough to get the job done. Here's what you should do:
Take a measurement of the door
It's time to replace your uPVC doors if they are having difficulty locking them or if they don't shut. If you've just moved into a new property, or a tenant has moved out without returning keys, or if your multipoint gearbox is showing signs of wear and tear, changing the barrel of your lock to an alternative one will give you an additional layer of security.
Before purchasing a new lock, you'll need take key measurements to ensure that the new cylinder is properly fitted and won't affect your home security. The backset is the most critical. This is the distance that runs from the centre of the keyhole bore hole to the edge of the door. It's usually 2 3/8 or even 2 3/4 inches. Use rulers or measuring tapes to measure this measurement and write the results on a piece of paper or notepad.
You'll also need to know the faceplate width. This is the measurement of the faceplate that covers the mechanism of the lock. If possible, purchase an alternate lock manufactured by the same manufacturer, as they will be manufactured to the same measurements. If you can't find the name of the manufacturer or mark on the lock, take a measurement of the length of the cylinder. You can also check this by putting a pencil in the keyhole and measuring from the top of the lock to the middle of the pencil mark on both sides of the cylinder.
Once you have the measurements then you can begin to remove the old cylinder. Begin by loosening the screw that holds the handle with a Phillips-head driver, then loosen the screws that hold the handles' exterior and interior to one another. Once these screws are removed, you can then remove the barrel screw located on the exterior handle. Then pull the cylinder out.
If the cylinder is stuck in the lock you could try using WD-40, or another lubricant. It is crucial not to force it out. Forceful turns can damage your lock's internal gearbox. Consider upgrading to a lock that has anti-snap and anti-bump security. This will make it more resistant to attacks by thieves.
Source the Lock
When purchasing a new door lock you must take into consideration a few things. Make sure you have the correct size cylinder for your door and ensure you're purchasing from a trusted brand to ensure a good fit and high-quality. You'll need some basic tools for the job including a screwdriver and mallets made of rubber.
There are several signs your lock made of upvc is wearing out and requires to be replaced. The most common signs are visible damage to the lock or a handle that's loose and not fitting correctly. If the lock is jamming, or isn't locking at all, it's time to get a new lock.
Once you've selected the perfect lock, it's crucial to install it correctly so that it operates properly and locks securely. Follow the manufacturer's instructions when installing the multipoint lock mechanism in the Upvc panel. Install the appropriate faceplates, handles, and other parts. Once everything is in place check the mechanism by locking and unlocking the door from inside and outside. Once you've completed the project and are happy with the results, it's time to have celebration.
A door lock made of upvc may sound intimidating, but it's a fairly easy DIY task that can be accomplished without the help of a locksmith. It's not difficult to change your lock if you are aware of the signs and have the right tools.
Remember that a upvc lock will benefit from lubrication just like any other moving component. A few sprays of silicone or graphite powder lubricant could help to prolong their lifespan by ensuring they're free of excess friction that can wear them down over time. Regular cleaning of your door lock mechanisms with WD-40 as well as a damp cloth will help to keep them in top condition.
Take out the Cylinder
If you're having trouble with your doors made of upvc, it may be time to replace the barrel of your lock. This is a simple DIY project that can be completed in a few minutes and is a great method to keep your home secure. This requires you to determine the brand of the lock to find the appropriate replacement.
A door lock that is broken can be a major inconvenience, and it can also create a serious security risk. Locks on uPVC doors are susceptible to malfunction, and it is crucial to check them on a regular basis. In fact, experts suggest that you replace your lock every seven years. If your lock is seriously damaged or you're not satisfied with its performance, a professional's assistance may be worth considering.
For uPVC it is a pin system, referred to as the euro cylinder is employed in most instances. They are easy to use and rarely break down, but are still vulnerable. As a result it's a good idea to replace the lock's cylinder by one that is more modern and has anti-snap and anti-bump security to stop burglaries.
The first step in changing your uPVC locks is to remove the handle. This will expose the old cylinder. This can be difficult because there are often some screws hidden underneath the handles, so make sure you have a screwdriver on hand. replacement lock for upvc door is to gently pull and wiggle the cylinder until it loosens. When it does then, you can take it from its socket.
When you have found an appropriate replacement you can simply screw it in and reverse the removal process. Be cautious not to tighten too much because this could cause the cylinder to become stuck in the door and not work as it should. Test the uPVC replacement lock by opening it and closing it from both sides. You should be able now to lock and unlock the door using your key. If you don't, check whether the screws are tight and try again.
Install the Lock
You'll have to do a bit of research first to make sure that the lock you select is the right one for your door. You'll be required to be aware of your faceplate and backset dimensions which is the distance between the edge of the front door and the centre of the handle/cylinder with the type of lock you want in order to make sure that the new lock is fitted correctly and does not compromise security.
After you've completed this, you're now ready to start installing the new lock. It is best to prop the door open, or lock it so that it does not close during the installation process. The first step is to loosen the screws that hold the handle in place by using a Phillips-head screwdriver. After that then you'll be able to slide the inner and outer handle apart.
Now you can begin to remove the old cylinder. This is something you'll want to do by unscrewing it from its barrel. After you've removed the cylinder then you'll be able to install the new lock, making sure that you follow the instructions for the particular model you have. Once the lock is in place you can test the new lock by removing and closing the door from the outside and inside, locking and unlocking it from inside, and then testing it again.
There are a number of reasons why you might need to change the locks on your uPVC door. You might have recently moved in and haven't had a key. The previous tenant might not have returned it. You might also prefer to upgrade your lock to one that is more secure. Whatever the reason, changing the lock cylinder is simple and shouldn't take more than five minutes.
Whether you have a multipoint lock or single-point lock, they all work on the same basic mechanism. This means that they could be prone to problems occasionally that could result in them not being able to close or getting stuck. This can be due to wear and tear, weather conditions or simply due to daily use. Luckily, most of these issues can be resolved with some minor maintenance or with the help of locksmith.